师资队伍

副教授 学院首页 > 师资队伍 > 副教授 > 正文
周乐来
作者:   时间:2018-12-17   点击数:
姓名: 周乐来


                       修改个人资料                    
性别:
民族: 汉族
出生年月: 1983.08
学历: 博士
职称: 副教授
导师信息: 硕士生导师
职务:
党派:
电话: 15866682985
传真:
学科一: 控制科学与工程
学科二: 模式识别与智能系统
邮箱: zhoulelai@sdu.edu.cn
个人主页: http://
所在院系: 山东大学控制科学与工程学院
研究方向: 机器人技术;机器人设计与系统优化;柔顺机器人设计与控制;机器人机构设
通信地址: 济南市经十路17923号山东大学千佛山校区,控制科学与工程学院

山东电子学会标准化管理委员会 委员                                                

IEEE, IEEE Robotics and Automation Society等国际协会会员;

           “无人系统系统”期刊编委      

Mechanism and Machine Theory, Measurement, Journal of Bionic Engineering, Robotics and Autonomous Systems, ASME Journal of Mechanisms and Robotics, Mechatronics, 等国际期刊审稿人

研究方向                                          

机器人技术,机器人设计与系统优化,柔顺机器人设计与控制,人机协作检测             

科研工作经历:              

2002.9-2006.7,北京科技大学,工学学士      

2006.9-2008.9,北京航空航天大学,工学硕士      

2008.10-2011.12Aalborg University, Denmark,博士      

2011.1-2011.5University of California Berkeley, USA,访问学者      

2012.1-2013.10Aalborg University, Denmark,博士后      

2015.12至今,山东大学控制科学与工程学院,副研究员                    

目前在研项目:                      

[1]     国家自然科学基金面上项目,基于能量优化的四足机器人分布柔顺驱动机理及控制策略研究,2020.01-2023.12,经费:58万元,项目负责人 

[2]     **科技创新特区项目,面向xxx研究,2018.11-2021.10,经费:460万元,项目负责人      

[3]     **科技创新特区项目,高机动xxx技术,2018.11-2020.10,经费:190万元,项目负责人      

[4]   国家重点研发计划子课题,人体碰撞安全评估系统研制,2017.07-2019.12,经费:324万元,课题负责人

[5] 国家自然科学基金青年项目,基于旋量理论的变刚度柔顺机械臂建模方法研究,2017.01-2019.12,经费:21万元,项目负责人负责人

[6] 山东省重点研发计划项目,面向装配作业的人机协作型双臂七自由度机器人的开发,2017.06-2020.06,经费:70万元,山东大学负责人

结题项目

[1] **科技创新特区项目,高机动XXXXXX技术,2017.07-2018.06,经费:360万元,项目负责人

发表期刊论文: 

[1] Xiaolong Xu, Yujie Sun, Xincheng Tian, Lelai Zhou* and Yibin Li, A proposed attitude estimator with reliability test criteria for sensor data fusion, Measurement, 150, 107046, pp. 1-12, 2020. (SCI, 影响因子: 2.791)

[2] Teng Chen, Xiaobo Sun, Ze Xu, Yibin Li, Xuewen Rong, and Lelai Zhou*, A Trot and Flying Trot Control Method for Quadruped Robot Based on Optimal Foot Force Distribution, Journal of Bionic Engineering, 16(4), pp. 621-632, 2019. (SCI, 影响因子: 2.463)

[3] Kun Yang, Yibin Li, Lelai Zhou* and Xuewen Rong, Energy Efficient Foot Trajectory of Trot Motion for Hydraulic Quadruped Robot, Energies, 12(13), 2513, 2019. (SCI, 影响因子: 2.707)

[4] Kun Yang, Xuewen Rong, Lelai Zhou* and Yibin Li, Modeling and Analysis on Energy Consumption of Hydraulic Quadruped Robot for Optimal Trot Motion Control, Applied Sciences, 9(9), 1771, 2019. (SCI, 影响因子: 2.217)

[5] Xiaolong Xu, Xincheng Tian, Lelai Zhou* and Yibin Li, A decision-tree based multiple-model UKF for attitude estimation using low-cost MEMS MARG sensor arrays, Measurement, vol. 135, pp. 355-367, 2019. (SCI, 影响因子: 2.791)

[6] Teng Chen, Xuewen Rong, Yibin Li, Chao Ding, Hui Chai and Lelai Zhou*, A Compliant Control Method for Robust Trot Motion of Hydraulic Actuated Quadruped Robot, International Journal of Advanced Robotic Systems, vol. 15, no. 6, pp: 1-16, 2018. (SCI, 影响因子: 0.952)

[7] Xiaolong Xu, Xincheng Tian and Lelai Zhou, A Robust Incremental-Quaternion-Based Angle and Axis Estimation Algorithm of a Single-Axis Rotation Using MARG Sensors, IEEE Access, 6:42605-42615, 2018. (SCI, 影响因子: 3.557)

[8] Kun Yang, Lelai Zhou, Xuewen Rong and Yibin Li, Onboard Hydraulic System Controller Design for Quadruped Robot Driven by Gasoline Engine, Mechatronics, 52:36-48, 2018. (SCI, 影响因子: 2.496)

[9] Lelai Zhou, Yibin Li and Shaoping Bai, “A human-centered design optimization approach for robotic exoskeletons through biomechanical simulation”, Robotics and Autonomous Systems, vol. 91, pp:337-347, 2017 (SCI)

[10] Lelai Zhou, Shaoping Bai and Yibin Li, “Energy Optimal Trajectories in Human Arm Motion Aiming for Assistive Robots”, Modeling, Identification and Control, vol. 38, no. 1, pp:11-19, 2017 (SCI)

[11] Lelai Zhou, Shaoping Bai, Michael Skipper Andersen, and John Rasmussen, “Modeling and Design of a Spring-loaded, Cable-driven, Wearable Exoskeleton for the Upper Extremity”, Modeling, Identification and Control, vol. 36, no. 3, pp: 167-177, 2015. (SCI)

[12] Lelai Zhou, and Shaoping Bai, “A New Approach to Design of a Lightweight Anthropomorphic Arm for Service Applications”, ASME Journal of Mechanisms and Robotics, vol. 7, no. 3, pp:031001-031001-12, 2015 (SCI)

[13] Shaoping Bai, Lelai Zhou, and Guanglei Wu, “Manipulator Dynamics”, Handbook of Manufacturing Engineering and Technology, Springer Publishing Company, pp: 1-17, 2014

[14] Lelai Zhou, Shaoping Bai, and Michael R. Hansen, “Integrated Dimensional and Drive-Train Design Optimization of a Light-Weight Anthropomorphic Arm”, Robotics and Autonomous Systems, vol. 60, no. 1, pp:113-122, 2012 (SCI)

[15] Lelai Zhou, Shaoping Bai, Michael R. Hansen, and John Rasmussen, “Modeling of Human Arm Energy Expenditure for Predicting Energy Optimal Trajectories”, Modeling, Identification and Control, vol. 32, no. 3, pp: 91-101, 2011. (SCI)

[16] Lelai Zhou, Shaoping Bai, and Michael R. Hansen, “Design Optimization on the Drive Train of a Light-Weight Robotic Arm”, Mechatronics, vol. 21, no. 3, pp:560–569, 2011. (SCI, 影响因子: 2.496)

招收研究生:

每年招收2~4名研究生,招收控制科学与工程专业学硕和电子信息工程专硕,欢迎机械电子工程专业学生以推免或调剂方式加入团队

上一条:王炳昌

下一条:谯旭

©2019控制科学与工程 学院 山东大学千佛山校区
山东省济南市经十路17923号 邮编250061